New Items

Approx. Rs 45,000 / PieceGet Latest Price

Approx. Rs 50 Lakh / PieceGet Latest Price

Approx. Rs 23,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 65,000 / PieceGet Latest Price

Approx. Rs 15 Lakh / PieceGet Latest Price

Approx. Rs 4 Lakh / PieceGet Latest Price

Approx. Rs 6 Lakh / PieceGet Latest Price

• Packing range: 200 gm to 5 Kg.

• 34-36 Cans / Min. for 200 gm
• 20-24 Cans / Min. for 1 Kg
• 12-14 Cans / Min. for 2 Kg
• 8-10 Cans / Min. for 3 Kg
• 4-6 Cans / Min. for 5 Kg
• Filling accuracy: ± 0.5% of HPS At S. O. P. and S. O. C.
• Operation: electro-pneumatic
• Electric supply: 415 V AC, 3 Phase
• Power consumption: 5.5 HP Approx
• Air supply: @ 6 kg/cm2
• Air Consumption: 120 LPM
• Man Power reqd: 2 Nos
• Space requirement: 6.1 Mtr. x 1.5 Mtr.

• Construction: dodge type
• Track width: 250 mm
• Height: 800 mm
• Length: 1000 mm + 2100 mm (in-feed + filler
• Guide rails: Adjustable
• Drive: HP gear motor
• Operation: electrical, through V/F drive

• Filler: augur type volumetric type timer base [as per attached specs.]
• Range: 500 gm to 5 Kg
• Can lift auto infeed: pneumatic for cavity killing
• System: using infeed valve actuator assy. (40 mm) photo sensor operated

• Construction: S.S. slat belt type
• Belt width: 190 mm
• Track width: 250 mm
• Height: 800 mm
• Length: 3000 mm
• Linear Speed: 14 mtrs per min
• Guide Rails: adjustable
• Drive: ½ HP gear motor
• Operation: electric

• Material: industrial grease - temperature: 70-80 degree centigrade
• Range: 0.5 to 5 kg., in tins / pails
• Hopper capacity: 35 Ltr. approx. made out of 16 swg., S.S. 304 sheet
• Product feed: automatic through actuated valve having auto level control
• Material flow: by rotating auger
• Flow control: digital programmable timer
• Fill setting: with key pad switches
• Fill accuracy: ± 0.5% of HPS at S.O.P. & S.O.C.
• Filling rate: 300 gms. / sec
• Augur control - by E / M clutch break unit
• Drive transfer: using ‘V’ belt
• Augur drive motor: 1 H.P., 3 phase, 415 V A.C.
• Mixer / wiper drive: using additional gear motor cap. 0.5 HP with suitable starter
• Power supply: 415 V A.C., 3 phase 4 wire 230 V A.C., 1 phase 3 wire
• Compress air supply: @ 6 kg / cm²
• Consumption: 40 LPM
• General construction: the machine fabricated out of M.S. angle, sheet etc, hopper and all other contact parts are made out of S.S. 304 and wiper strips of PTFE

Approx. Rs 1 Lakh / PieceGet Latest Price

• Packing range: 200 gm to 5 Kg.

• 34-36 Cans / Min. for 200 gm
• 20-24 Cans / Min. for 1 Kg
• 12-14 Cans / Min. for 2 Kg
• 8-10 Cans / Min. for 3 Kg
• 4-6 Cans / Min. for 5 Kg
• Filling accuracy: ± 0.5% of HPS At S. O. P. and S. O. C.
• Operation: electro-pneumatic
• Electric supply: 415 V AC, 3 Phase
• Power consumption: 5.5 HP Approx
• Air supply: @ 6 kg/cm2
• Air Consumption: 120 LPM
• Man Power reqd: 2 Nos
• Space requirement: 6.1 Mtr. x 1.5 Mtr.

• Construction: dodge type
• Track width: 250 mm
• Height: 800 mm
• Length: 1000 mm + 2100 mm (in-feed + filler
• Guide rails: Adjustable
• Drive: HP gear motor
• Operation: electrical, through V/F drive

• Filler: augur type volumetric type timer base [as per attached specs.]
• Range: 500 gm to 5 Kg
• Can lift auto infeed: pneumatic for cavity killing
• System: using infeed valve actuator assy. (40 mm) photo sensor operated

• Construction: S.S. slat belt type
• Belt width: 190 mm
• Track width: 250 mm
• Height: 800 mm
• Length: 3000 mm
• Linear Speed: 14 mtrs per min
• Guide Rails: adjustable
• Drive: ½ HP gear motor
• Operation: electric

• Material: industrial grease - temperature: 70-80 degree centigrade
• Range: 0.5 to 5 kg., in tins / pails
• Hopper capacity: 35 Ltr. approx. made out of 16 swg., S.S. 304 sheet
• Product feed: automatic through actuated valve having auto level control
• Material flow: by rotating auger
• Flow control: digital programmable timer
• Fill setting: with key pad switches
• Fill accuracy: ± 0.5% of HPS at S.O.P. & S.O.C.
• Filling rate: 300 gms. / sec
• Augur control - by E / M clutch break unit
• Drive transfer: using ‘V’ belt
• Augur drive motor: 1 H.P., 3 phase, 415 V A.C.
• Mixer / wiper drive: using additional gear motor cap. 0.5 HP with suitable starter
• Power supply: 415 V A.C., 3 phase 4 wire 230 V A.C., 1 phase 3 wire
• Compress air supply: @ 6 kg / cm²
• Consumption: 40 LPM
• General construction: the machine fabricated out of M.S. angle, sheet etc, hopper and all other contact parts are made out of S.S. 304 and wiper strips of PTFE

Approx. Rs 5 Lakh / PieceGet Latest Price

• Packing range: 200 gm to 5 Kg.

• 34-36 Cans / Min. for 200 gm
• 20-24 Cans / Min. for 1 Kg
• 12-14 Cans / Min. for 2 Kg
• 8-10 Cans / Min. for 3 Kg
• 4-6 Cans / Min. for 5 Kg
• Filling accuracy: ± 0.5% of HPS At S. O. P. and S. O. C.
• Operation: electro-pneumatic
• Electric supply: 415 V AC, 3 Phase
• Power consumption: 5.5 HP Approx
• Air supply: @ 6 kg/cm2
• Air Consumption: 120 LPM
• Man Power reqd: 2 Nos
• Space requirement: 6.1 Mtr. x 1.5 Mtr.

• Construction: dodge type
• Track width: 250 mm
• Height: 800 mm
• Length: 1000 mm + 2100 mm (in-feed + filler
• Guide rails: Adjustable
• Drive: HP gear motor
• Operation: electrical, through V/F drive

• Filler: augur type volumetric type timer base [as per attached specs.]
• Range: 500 gm to 5 Kg
• Can lift auto infeed: pneumatic for cavity killing
• System: using infeed valve actuator assy. (40 mm) photo sensor operated

• Construction: S.S. slat belt type
• Belt width: 190 mm
• Track width: 250 mm
• Height: 800 mm
• Length: 3000 mm
• Linear Speed: 14 mtrs per min
• Guide Rails: adjustable
• Drive: ½ HP gear motor
• Operation: electric

• Material: industrial grease - temperature: 70-80 degree centigrade
• Range: 0.5 to 5 kg., in tins / pails
• Hopper capacity: 35 Ltr. approx. made out of 16 swg., S.S. 304 sheet
• Product feed: automatic through actuated valve having auto level control
• Material flow: by rotating auger
• Flow control: digital programmable timer
• Fill setting: with key pad switches
• Fill accuracy: ± 0.5% of HPS at S.O.P. & S.O.C.
• Filling rate: 300 gms. / sec
• Augur control - by E / M clutch break unit
• Drive transfer: using ‘V’ belt
• Augur drive motor: 1 H.P., 3 phase, 415 V A.C.
• Mixer / wiper drive: using additional gear motor cap. 0.5 HP with suitable starter
• Power supply: 415 V A.C., 3 phase 4 wire 230 V A.C., 1 phase 3 wire
• Compress air supply: @ 6 kg / cm²
• Consumption: 40 LPM
• General construction: the machine fabricated out of M.S. angle, sheet etc, hopper and all other contact parts are made out of S.S. 304 and wiper strips of PTFE

Approx. Rs 1 Lakh / PieceGet Latest Price

• Packing range: 200 gm to 5 Kg.

• 34-36 Cans / Min. for 200 gm
• 20-24 Cans / Min. for 1 Kg
• 12-14 Cans / Min. for 2 Kg
• 8-10 Cans / Min. for 3 Kg
• 4-6 Cans / Min. for 5 Kg
• Filling accuracy: ± 0.5% of HPS At S. O. P. and S. O. C.
• Operation: electro-pneumatic
• Electric supply: 415 V AC, 3 Phase
• Power consumption: 5.5 HP Approx
• Air supply: @ 6 kg/cm2
• Air Consumption: 120 LPM
• Man Power reqd: 2 Nos
• Space requirement: 6.1 Mtr. x 1.5 Mtr.

• Construction: dodge type
• Track width: 250 mm
• Height: 800 mm
• Length: 1000 mm + 2100 mm (in-feed + filler
• Guide rails: Adjustable
• Drive: HP gear motor
• Operation: electrical, through V/F drive

• Filler: augur type volumetric type timer base [as per attached specs.]
• Range: 500 gm to 5 Kg
• Can lift auto infeed: pneumatic for cavity killing
• System: using infeed valve actuator assy. (40 mm) photo sensor operated

• Construction: S.S. slat belt type
• Belt width: 190 mm
• Track width: 250 mm
• Height: 800 mm
• Length: 3000 mm
• Linear Speed: 14 mtrs per min
• Guide Rails: adjustable
• Drive: ½ HP gear motor
• Operation: electric

• Material: industrial grease - temperature: 70-80 degree centigrade
• Range: 0.5 to 5 kg., in tins / pails
• Hopper capacity: 35 Ltr. approx. made out of 16 swg., S.S. 304 sheet
• Product feed: automatic through actuated valve having auto level control
• Material flow: by rotating auger
• Flow control: digital programmable timer
• Fill setting: with key pad switches
• Fill accuracy: ± 0.5% of HPS at S.O.P. & S.O.C.
• Filling rate: 300 gms. / sec
• Augur control - by E / M clutch break unit
• Drive transfer: using ‘V’ belt
• Augur drive motor: 1 H.P., 3 phase, 415 V A.C.
• Mixer / wiper drive: using additional gear motor cap. 0.5 HP with suitable starter
• Power supply: 415 V A.C., 3 phase 4 wire 230 V A.C., 1 phase 3 wire
• Compress air supply: @ 6 kg / cm²
• Consumption: 40 LPM
• General construction: the machine fabricated out of M.S. angle, sheet etc, hopper and all other contact parts are made out of S.S. 304 and wiper strips of PTFE

Approx. Rs 20,000 / PieceGet Latest Price

Approx. Rs 5 Lakh / PieceGet Latest Price

Being a client centric firm, we are involved in providing Tilting Mixing Kettle. Moreover, experts check these products on diverse quality norms in order to deliver a defect free range.

Having a definite quality managements system in the market, we are engaged in offering best and excellent quality assortment of Mixing Kettle. It has wide range of kettles & pans for boiling, braising & frying.



We are a renowned name in the industry to provide our precious patrons with a qualitative range of Mixing Kettle.

This steam kettle is manufactured using superior quality raw materials and advanced technology under the meticulous supervision of our veteran team of professionals in tandem with the international quality standards.

Widely demanded in chemical, pharmaceutical and food processing industry, clients can avail this steam kettle from us in various technical specifications at pocket friendly price.

Features:

•Low maintenance

•Quality tested

•Sturdy structure

•Durable finish

•Lightweight

Additional Information:

Approx. Rs 1 Lakh / PieceGet Latest Price

Approx. Rs 2.2 Lakh / PieceGet Latest Price

• Short mixing and granulation time.
• Bowl shape design to have no dead spaces.
• A wide range of applications.
• Easy scale up & Scale down between machine sizes.
• Uniform distribution of all formulation ingredients.
• Uniform granules by gentle processing.
• Precision engineered
• Flawless performance
• Long functional life

Approx. Rs 2.5 Lakh / PieceGet Latest Price

• Capacity: from 250 gms to 5000 gms powder
• Control: Solid state electronic controller
• Operation mode: auto and manual mode with adjustable delay time between the fills
• Filling speed: upto15 pouches per minute of 250 gms. Pack size, depending upon bulk density, product flow ability and efficiency of operator
• Auger & funnel: machine will be provided with one set of auger and funnel for filling one
• Filling accuracy: ± 2% at constant powder level in the machine hopper and consistency
• Powder feeding: To be arranged by you

• MOC: SS304 with MS component plate
• Controller: Solid state electronic controller with photoelectric sensor
• Filling mode: volumetric filling mode

• Motor: 2 HP motor with variable speed drive
• Clutch/brake unit: electromagnetic clutch/brake unit for filling control
• Stirrer: through heavy metallic helical gearing
• Stirrer elements: stirrer elements are heavier for large quantity of powder

• Machine hopper: 80 litres
• MOC: All parts coming in direct contact of the product made from S.S. 304. All other parts made from MS/CI (for GMP models all parts are made from S.S. 304 or covered with S.S. 304 sheets)

• Main machine: 950mm X 1000mm X 1250mm
• Supporting frame: 750mm X 900mm X 900mm
• Net weight: 275 kgs. approx
• Mobility: main machine with frame provided with castor wheels

Approx. Rs 3.5 Lakh / PieceGet Latest Price

• Capacity: from 250 gms to 5000 gms powder
• Control: Solid state electronic controller
• Operation mode: auto and manual mode with adjustable delay time between the fills
• Filling speed: upto15 pouches per minute of 250 gms. Pack size, depending upon bulk density, product flow ability and efficiency of operator
• Auger & funnel: machine will be provided with one set of auger and funnel for filling one
• Filling accuracy: ± 2% at constant powder level in the machine hopper and consistency
• Powder feeding: To be arranged by you

• MOC: SS304 with MS component plate
• Controller: Solid state electronic controller with photoelectric sensor
• Filling mode: volumetric filling mode

• Motor: 2 HP motor with variable speed drive
• Clutch/brake unit: electromagnetic clutch/brake unit for filling control
• Stirrer: through heavy metallic helical gearing
• Stirrer elements: stirrer elements are heavier for large quantity of powder

• Machine hopper: 80 litres
• MOC: All parts coming in direct contact of the product made from S.S. 304. All other parts made from MS/CI (for GMP models all parts are made from S.S. 304 or covered with S.S. 304 sheets)

• Main machine: 950mm X 1000mm X 1250mm
• Supporting frame: 750mm X 900mm X 900mm
• Net weight: 275 kgs. approx
• Mobility: main machine with frame provided with castor wheels

Approx. Rs 15 Lakh / PieceGet Latest Price

The homogenizer is often necessary to mix one or more substances within a liquid.

This device allows to micronize and scatters the particles suspended in the fluid, so that the product become highly stable, no matter the followings treatments and stockings the products may undergo.

The homogenizer delivers unparalleled consistency and control of high shear process applications such as, Immiscible Phase Emulsifying, Homogenizing, Wet Grinding, Texturing, Deagglomeration and Fine Dispersing.

The product arrives to the homogenizing at a low speed and at high pressure (cause by the little gape between the passing head and collision head).

During the passage the product is subjected to numerous forces which cause the particles micronization: a violent acceleration followed by an immediate deceleration that produces cavitations and then the globules explosion.

Strong turbulence united to high frequency vibrations.

Collision cutting strengths derived from the laminar passage between the homogenizing valve surfaces and the following impact with the collision ring.

Incorporating up to single sets of toothed rotor-stator heads, engineered to extremely fine radial tolerances, the Emulsifier processes product at high differential velocities, as many as 18 times in a single-pass.

The result is consistent, repeatable quality at capacities exceeding those of conventional multiple-pass technology, such as in-tank high-shear mixers, colloid mills and shear pumps.

Additional Information:

Approx. Rs 8 Lakh / PieceGet Latest Price